wedi Fundo Integro – the flattest walk-in shower tray with integrated waste
The wedi Fundo Integro is a complete walk-in shower tray with an integrated waste and a total installation height of just 90 mm. Ideal for anyone looking to build a flawless walk-in shower quickly and without risk. No drying times, no wet screeds and always a perfectly formed slope – the Fundo Integro delivers maximum reliability for both renovation and new-build projects.
➕ Only 90 mm installation height – ideal for renovations and timber floors
➕ 100% waterproof XPS shower tray
➕ Prefabricated slope for reliable drainage
➕ Integrated, standards-compliant DN50 waste
➕ Lightweight and quick to install
➕ Compatible with Fundo Fino waste covers and wedi Fundo Top
Technical specifications
- Type: Walk-in shower tray with integrated waste
- Installation height: 90 mm
- Waste: Integrated point waste
- Waste position: Central or offset
- Material: XPS rigid foam with fibre-reinforced mortar coating
- Pre-sloped: Yes
- Drainage capacity: approx. 48 l/min (DIN EN 1253)
Build with confidence using wedi Fundo Integro
The wedi Fundo Integro provides a safe, waterproof base for modern walk-in showers. Combine with wedi sealing systems, stylish Fundo Fino covers or a wedi Fundo Top surface for a premium, low-maintenance finish with long-term peace of mind.
wedi Fundo Integro – the flattest complete walk-in shower tray with integrated waste
The wedi Fundo Integro is a prefabricated walk-in shower tray with an integrated waste and a total installation height of just 90 mm. Designed for projects where speed, reliability and flawless drainage are essential. As part of the complete wedi system, the Fundo Integro provides a safe, waterproof and tile-ready base for modern walk-in showers.
The solution for fast, reliable and worry-free installation
When building or renovating a bathroom, certainty matters. No waiting for drying times, no risk of incorrect slopes and no doubts about waterproofing. The wedi Fundo Integro is engineered to eliminate these concerns. Thanks to the prefabricated slope, integrated waste and waterproof XPS core, it delivers a predictable and secure result – even on timber floors or where installation height is limited.
- Fast installation without wet screeds or drying times
- Perfectly formed slope – no standing water
- Safe solution for bathrooms on timber floors
- Ideal for renovation projects with limited build-up height
- No risk of leaks or construction errors
100% waterproof and ready for tiling
The core of the Fundo Integro is made from extruded polystyrene (XPS) with a closed-cell structure. This material is fully waterproof and does not absorb moisture. The surface is finished with a robust, fibre-reinforced mortar layer, allowing tiles to be installed directly. The prefabricated slope reliably channels water towards the centrally or offset positioned waste.
Integrated waste – flat, smart and standards-compliant
The Fundo Integro is supplied as a complete system with a fully integrated horizontal DN50 waste. The waste complies with DIN EN 1253 and offers a drainage capacity of approximately 48 litres per minute. Its flat, integrated design keeps the overall installation height to a minimum without compromising performance or safety.
- Integrated DN50 waste, factory-sealed and waterproof
- Available with central or offset waste position
- Compatible with Fundo Fino stainless steel waste covers
- Suitable for intensive daily use
Fast installation for renovation and new builds
The Fundo Integro is lightweight and easy to handle. It can be installed on almost any load-bearing substrate and, if required, trimmed on site while maintaining the geometry and slope. Combined with wedi sealing systems, it creates a fully waterproof shower solution without complex build-ups.
- Prefabricated shower tray – no wet construction processes
- Ready for tiling immediately
- Suitable for renovation and new-build projects
- Perfectly compatible with wedi building boards and wall systems
Design freedom with waste covers and wedi Fundo Top
For the final finish, the Fundo Integro can be combined with a range of Fundo Fino waste covers, allowing the appearance of the shower to match the overall bathroom design. The tray is also compatible with wedi Fundo Top – a ready-to-use, seamless surface that can replace tiles and creates a modern, low-maintenance, grout-free finish.
Specifications
| Manufacturer | wedi |
| Product name | wedi Fundo Integro |
| Type | Complete walk-in shower tray |
| Available sizes |
Available in multiple sizes – see size options |
| Installation height | 90 mm |
| Waste | Integrated point waste (DN50) |
| Waste position | Central or offset |
| Drainage capacity | Approx. 48 l/min (DIN EN 1253) |
| Material | XPS rigid foam with mortar coating |
| Waterproof | Yes – 100% |
| Scope of delivery |
wedi Fundo Integro shower tray
Stainless steel waste cover 6.1 – 115 × 115 mm
Plastic frame
Sealing corner 800 × 800 mm
Height adjustment ring 40 mm
Lubricant for installation
|
| Application | Walk-in showers and wet rooms |
A detailed technical drawing of this wedi Fundo Integro shower tray is available on request.
Part of the complete wedi system
The wedi Fundo Integro works seamlessly with wedi building boards, wedi Tools, sealing systems and wedi Fundo Top to form a complete, modular solution for waterproof bathrooms. This allows you to build faster, safer and with maximum design flexibility.
